Monitoring Station - Action Station

Use a second iPad or PC to display signals and initiate a user-defined action (e.g. as a projector)

You can start different presets depending on the use case:

1. Projector view iPad to iPad:

On the first iPad mini please rename the device first under Settings -> General -> Device -> and edit the name (tap on “Device” and edit on the right of “Device Name”).

Go back to Home, choose Action Preset 1.1, change the “Timeout” durations at the bottom right if needed (e.g. 5 and 10 seconds) and then press start (top left).

• Alert Screen Timeout Defines the amount of time in seconds during which the “Alert” mode (red color) will be displayed on the “Action” screen.
• Diagnostic Screen Timeout Defines the amount of time in seconds during which the “Diagnostics” screen will remain visible when using the corresponding toggle while the preset is actively running.

On the second iPad mini start Preset 11.4, tap on the new round button at the top right, select the exact name of the device you want to target from the list of Actors. Then press save and start sending.

Preset 11.4 is for the “vest detection”. Please note: Only properly worn vests are recognized.

The detection is currently optimized for yellow vests and can get enhanced anytime.

When the iPad detects a person with a vest, the screen of the other iPad should turn green for 30 seconds (or the amount of time you chose) and then revert to yellow. If a person without a vest is recognized the screen should turn red for the chosen amount of time.

The time and the warning screen are customizable.

For more information you may also want to take a look at Presets.

PLEASE REACH OUT TO AMA PROJECT MANAGEMENT IN CHARGE IN CASE OF ANY QUESTIONS OR ISSUES!