Thermal Camera Support for RealWear N520 & Z1
Dieser Inhalt ist noch nicht in deiner Sprache verfügbar.
Share thermal video feeds from Flir camera on Realwear
Section titled “Share thermal video feeds from Flir camera on Realwear”1. Introduction
Section titled “1. Introduction”The thermal camera module for the RealWear Navigator™ series is a dual-sensor module that integrates a 48 MP optical sensor and a FLIR Lepton® 3.5 thermal sensor. It allows seamless switching between the visible and infrared spectrums to capture thermal signatures from the environment.
Designed for hands-free operation, this module connects directly to the RealWear Navigator™ 520 and Z1 smart glasses, offering an immersive and intuitive experience for inspections and diagnostics in industrial environments.
2. Key Features
Section titled “2. Key Features”2.1 Advanced Thermography with FLIR
Section titled “2.1 Advanced Thermography with FLIR”- Thermal by FLIR technology, from the world leader in infrared imaging.
- Standard thermal image mode.
2.2 Hands-Free Operation
Section titled “2.2 Hands-Free Operation”- Voice commands allow users to conduct inspections and diagnostics without interrupting their workflow.
- Fully compatible with the RealWear Navigator™ 520 and Z1 , ensuring intuitive operation.
2.3 Rugged and Reliable
Section titled “2.3 Rugged and Reliable”- Intrinsically safe, ATEX Zone 1 verified smart glasses
- Built to withstand harsh industrial environments.
2.4 Enhanced Vision Capabilities
Section titled “2.4 Enhanced Vision Capabilities”- Combination of thermal and visible sensors to detect anomalies that are invisible to the naked eye.
- Early detection of potential issues before they become critical.
3. Use Cases
Section titled “3. Use Cases”3.1 Electrical Inspections
Section titled “3.1 Electrical Inspections”- Detect abnormal overheating on electrical equipment.
- Assist in preventive maintenance by identifying unexpected hot spots.
3.2 Monitoring Motors and Pumps
Section titled “3.2 Monitoring Motors and Pumps”- Check operating temperatures of motors and pumps.
- Detect overheating or abnormal friction in bearings.
3.3 Building Diagnostics
Section titled “3.3 Building Diagnostics”- Identify areas with poor insulation or air leaks.
- Detect thermal bridges through temperature variations on surfaces.
4. Technical Specifications
Section titled “4. Technical Specifications”4.1 Thermal Sensor
Section titled “4.1 Thermal Sensor”| Specification | Details |
|---|---|
| Model | FLIR Lepton® 3.5 |
| Thermal Resolution | 160 x 120 pixels |
| Frame Rate | 8.7 Hz |
| Field of View (FOV) | 57° (horizontal) / 71° (diagonal) |
| Temperature Range | -20°C to 400°C |
| Thermal Sensitivity (NETD) | <50 mK |
| Spectral Range | 8 to 14 µm |
| Accuracy | High-gain mode: ±5°C or ±5% (typical) Low-gain mode: ±10°C or ±10% (typical) |
4.2 Optical Camera
Section titled “4.2 Optical Camera”| Specification | Details |
|---|---|
| Sensor | 48 MP |
| Still Image Resolution | Up to 12 MP |
| Video Resolution | Up to 1080p at 60 fps |
5. Installation and Compatibility
Section titled “5. Installation and Compatibility”5.1 Compatibility
Section titled “5.1 Compatibility”- Supported Devices: RealWear Navigator™ 520 and Z1.
5.2 Module Installation
Section titled “5.2 Module Installation”- Connection: Attach the module to the dedicated port on the RealWear Navigator™.
- Power Supply: The module is powered directly by the device.
- Activation: Follow the on-screen instructions to initialize the module.
- Usage: Control the camera via voice commands or Remotely
6. Contact and Support
Section titled “6. Contact and Support”For assistance or additional information:
- Site support: XpertEye Support
- Email: support@xe.live